RDR Firmware Changelog

All notable changes to the RD Firmware will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

Versions marked with UPDATE! should not be used anymore.


[1.4.2] - 2021-09-03

This version corrects a problem with battery powered devices. Some devices did not properly detect the USB disconnect event so the battery powered mode was not enabled. This was leading to a very short battery life.

We let the device beep when there is an LoRaWAN error. This helps the user solve LoRaWAN issues before the battery gets empty.


[1.4.1] - 2021-08-16

This bugfix release corrects a problem with battery powered devices. It has been observed that sometimes the device does not turn off to save power, which may result in a shortened battery life.

Fixed

  • USB cable removal detection rewritten

Added

  • nothing

[1.4.0] - 2021-06-02 - UPDATE!

Please update to V1.4.1 as we found out some RDR do not power down to save energy when running on batteries.

First firmware that supports RDR Rev.02 devices

Added

  • Support for Rev.02 Hardware Boards
  • Possibility to disable ADR
  • Data rate can be forced by disabling ADR and setting the desired DR
  • Enable / Disable Public LoRaWAN Mode

Changed

  • Hardware faults are indicated by both LEDs blinking red
  • Heartbeats Interval can now be set between 1 and 1440min

Fixed

  • Power consumption optimizations
  • NTAG210u/216/213 are all read ok now