PCR Setup Tool Changelog

[6.3.0] - 2019-12-04

NEW: Added support for PCR2 R03 with firmware V3.0.x

[6.2.0] - 2019-11-05

NEW: Add Settings to the DB when in Admin mode FIX: Wait when closing serial port FIX: Removed Drivers from Help Menu as these are not needed for Win10 anymore

[6.1.0] - 2019-10-10

ADD: LoRaWAN enable ADD: Support for PCR2 V2.0.x

[6.0.1] - 2019-09-02

FIX: LastUpdatedBy not read from DB FIX: Check for serial number before writing to DB CHG: Add Firmware Version to Configuration Payload

[6.0.0] - 2019-09-29

Changed to SimplDeploy as ClickOnce is broken FIX: PCR1 Updated to new device library FIX: PCR2 Simulator broken

[5.6.2] - 2019-09-03

FIX: PCR1 Updated to new device library FIX: PCR2 Simulator broken

[5.6.1] - 2019-08-21

FIX: Tuning for PCR2 FW 1.5.2 (bigger timeouts)

[5.6.0] - 2019-07-31

FIX: All is async now FIX: waiting longer for V1.5.1 to connect due to radar init CHG: Removed FW1.3, FW1.4 as not in the field anymore

[5.5.0] - 2019-07-23

  • Added Simulator Mode
  • Added calculated Config Downlink Field
  • Added Save Settings

[5.4.0] - 2019-07-10

  • Changed name to “Factory Login” and “Factory Settings”
  • FW 1.5.0 added

[5.3.0] - 2019-06-12

  • Login by DoubleClicking Parametric Logo
  • Version for GPV Production of PCR2, TOPSNAP

[5.2.3] - 2019-06-03

  • Changed DevicesLibrary

[5.2.2] - 2019-06-03

  • Bugfix on DeviceMenu
  • try/catch over JSON parser

[5.2.1] - 2019-05-31

  • Improved login
  • Show shipped to on PCR2 devices

[5.2.0] - 2019-05-24

  • New Layout for PCR1 V1.x and V2.x
  • Changed Date Input to a more useful format
  • Added “Notes” Field for additional informations only seen by Parametric

[5.1.0] - 2019-05-08

  • Added PCR2 FW 1.4.x”
  • Changed name of “Uplink Delay” into “Event Suppression”
  • Added Property Radar Sensitivity (10 … 100% ) 100% is det.lim 200, 10% is 5000
  • added some links to the KB

[5.0.2] - 2019-05-06

  • Bugfix: Show Message when Settings have been saved in Production Mode

[5.0.1] - 2019-05-03

  • Bugfix: FW 1.2.0 was not recognized in V5.0.0

[5.0.0] - 2019-05-01

  • Access to Parametric Products Service Database
  • New Layout with Property Grid for Settings
  • Support for new PCR2 Firmware 1.3.x

[4.3.2] - 2019-03-13

  • Set LinkCheckInterval to 0 for disabling LinkCheck completely (needs PCR2 FW >=1.2.0)
  • FSB Select only shown on AU and US models

[4.3.1] - 2019-03-07

  • Updated NuGet Packages

[4.2.1] - 2018-11-21

  • Fixed timeout issue on PCR1 when saving
  • added Load/Save Menu to PCR1

[4.2.0] - 2018-11-10

  • Support for new PCR2 Firmware 1.2.x
  • New selector “FSB”
  • Fixed production mode entry

[4.1.1] - 2018-10-31

BUGFIX

  • Updated NuGet Packages as we had problems to install on italian Windows system

[4.1.0] - 2018-10-16

IMPROVEMENTS

  • Support for PCR2 FW1.1.0

[4.0.1] - 2018-09-14

BUGFIXES

  • Port scan improvement

[4.0.0] - 2018-09-06

  • updating to .Net 4.7.2
  • new icons

CHANGES

  • sends “restart” to PCR2 after saving LoRa keys
  • uses .Net4.7.1
  • updated NuGet packages

[3.1.1] - 2018-07-24

Integrated Production Mode, Removed ABP

CHANGES

  • Temporarely disabled ABP as Firmware < 1.0 is not ready

[3.1.0] - 2018-07-19

Integrated Production Mode

NEW

  • Temperature calibration (production mode)

CHANGES

  • You could enter production mode by holding CTRL and clicking the Parametric logo
  • Renamed AppEUI to JoinEUI

BUGFIXES

[3.0.0] - 2018-07-15

Integrated PCR2

CHANGES

  • PCR1 schreibt immer Port 14

BUGFIXES

  • some Tooltips corrected

[2.2.0] - 2018-06-05

CHANGES

  • one ‘Set’ Button for all settings
  • Version in Title

BUGFIXES

  • some Tooltips corrected

[2.1.0] - 2018-05-04

NEW

  • changed Name to PCRSetupTool
  • link to Website

[2.0.0] - 2018-04-13

NEW

  • automatic port scanning
  • new install source: https://feed.parametric.ch/pcr1/setup/