Table of Content

PCR2 Firmware Changelog

All notable changes to the PCR2 Firmware will be documented here.

[3.5.0] - 2020-06-25

Added

  • Support for PCR2-ODS devices
  • CLI commands to read out SBX parameters

When to update?

No need to update working PCR2-IN/OD/R/T devices as this version won’t correct anything.

Additional Information


[3.4.3] - 2020-06-24

Fixed

  • Problem when using XIO Downlinks in XIO RC Mode.

When to update?

Update if you are using XIO Downlinks

Additional Information


[3.4.2] - 2020-06-12

Fixed

  • CapacityLimit could not be set to more than 1000 persons

When to update?

If you need to set capactiy limit to more than 1000 persons

Additional Information


[3.4.1] - 2020-06-11

Fixed

  • PCR2-XIO devices did not switch to RC mode when receiving an XIO downlink

When to update?

Update if you are using XIO Downlinks.

Additional Information


[3.4.0]- 2020-06-09

Added

  • Extended Payload with sums that can also be reset by a downlink
  • Battery gauge to the Cayenne LPP Payload
  • Possibility to swithc the devices to class C mode
  • XIO Outputs can now be remote controlled (PCR2-XIO only)

When to update?

Update if you need the extended payload format

Additional Information


[3.3.2] - 2020-05-27

This is the first firmware that operates with the new PCR2-XIO devices with integrated digital outputs. PCR2-XIO devices have been released for various COVID-19 applications but can also be used as industrial counters connected to an external controller.

Added

  • Support for PCR2-XIO devices
  • Android App to read out NFC memory

Changed

  • Antenna Gain settings for better coverage

When to update?

  • When you plan to use the Android App
  • When you have issues with poor wireless coverage

Additional Information


[3.1.0] - 2020-03-19

Added

  • Cacapcity Counting Mode for COVID-19 counting applications

When to update?

  • When you plan to use Capacity Counting

Additional Information


[3.0.3] - 2020-01-14

Fixed

  • Removed the Uplink Interval limit. Uplink Interval can be set between 1-1440 min.

Additional Information


[3.0.2] - 2019-12-24

Fixed

  • Update only if you are using the CLI restart command

Additional Information


[3.0.1] - 2019-12-19

Fixed

  • Power optimizations (Radar timing)

When to update?

  • Update if you are not happy with power consumption.

Additional Information


[3.0.0] - 2019-12-04

First version for PCR2 Rev.03 devices

Added

  • We habe a Boot Button on the board for easy and save firmware updates. PCR Setup Tool now has integrated firmware update wizzard

Additional Information


How to Update Firmware

This procedure is for hardware rev. 03 devices only.

1. Check Hardware Revision

Please find the PCB number printed on the backside of the PCR2 mainboard.

Look for 1714-PCB0000-03

2. Connect your PCR2 to your PC

Connect your PCR2 with an USB cable to your Windows10 PC and start PCR Setup Tool.

Open PCR Setup Tool

3. Start Firmware Updater

Please start Firmware Updater and check if there is a new version available. Then follow the instructions of the wizzard.

Open PCR Setup Tool

Open PCR Setup Tool

Open PCR Setup Tool

4. Reconnect Device

Plug out and plug in device and check updated firmware version

Open PCR Setup Tool